Icom IC-7410 Transceiver USB New

Download Now
Icom IC-7410 Transceiver USB Driver

Icom IC HF amateur radio transceiver Buy the Icom IC here. IC I'm almost convinced this is the radio I want, for the price I'd like to The is hooked up to my computer using the USB port one. Icom proudly announces the debut of the new HF/50MHz transceiver IC The IC has been designed as an HF/50MHz specialized rig with The IC has a standard type B USB connector and can be connected to a PC.

Icom IC-7410 Transceiver USB Driver Windows 7

Type: Driver
240 (4.55)
Downloads: 19
File Size: 15.89Mb
Supported systems: Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP, Other
Price: Free* [*Free Registration Required]

Download Now
Icom IC-7410 Transceiver USB Driver

Such a curve displays scarcly the rectangular shape of the theoretical model, but a sort of bell shape which wings are more or less abrupt with skirts more of less short. Some of the best mechanical filters are Collins.

Icom IC-7410 Transceiver USB Driver PC

These filters are inserted all through the receiving chain at each IF stage. But in SSB, the signal is much wider.

The narrowest IF passband is 1. Clic on the drawing to enlarge.

ICOM USB Cat Psk31 Cable Ic-7000 703 7410 7200 7300

On the Yaesu these filters are installed at the second IF at 8. Like on all transceivers they can be combined in cascade to form the equivalent of one filter showing a variable bandwidth called VBT to Kenwood. In some books we read that a filter would works better if signals applied to it are weak. This is not true because the Icom IC-7410 Transceiver USB of a crystal or ceramic filter is very linear; it responds exactly the same way to large signals as it does to small signals.

IC HF/50MHz Transceiver - Features - Icom America

This means that whether the signal applied to the filter in within the Icom IC-7410 Transceiver USB passband or not, the amount of signal appearing at the output of the filter is proportional to the input signal applied. The method to suppress these undesired noises they are static noise or RFI consists in rejecting them outside the passband or, if they are on the same frequency, to attenuate the interfering signals as much as possible before they reach the RF amplification stage.

As you cannot change the filter passband, you need to apply one to three cascading methods to remove all interference and noise that prevent you listening your correspondent in good conditions. Let's see each of them in a few words illustrated with some graphs. High and Low cut settings Icom IC-7410 Transceiver USB first method consists in shifting the passband of each filter up or down in frequency until the noise has disappeared.

So the signal is now in sandwitch between the two filters, rejecting the interfering signals outside the passband see graph B. This technique does not modify the beat frequency oscillator Icom IC-7410 Transceiver USB tuned on the remote station frequency, so the signal sounds normal.

Your thoughts about the Icom IC? QRZ Forums

You can also use the High and Low cut controls to remove undesired audio high and low pitch from the desired signal and thus reduce or remove interference as well. These graphs explain better that any comment the effects of filters on interference and noise interfering with a signal in the passband.

  • USB Interface III
  • IC HF/50MHz Transceiver - Specifications - Icom America
  • Your thoughts about the Icom IC-7410?
  • Icom IC-7600 - Setting up for WSPR with Windows 10 and XP
  • Frequencies

The first graph describes the default bandwidth of an SSB filter, all controls off. The second graph displays the effect of Low and High cut controls on two tunes interfering with a signal yellow in the center of the passband.

The fourth graph displays two interferences on the same frequency as the signal. In playing cleverly with these controls you can reject all residual RFI and noise.

ICOM IC-7410 HF/50MHz All Mode Station Transceiver

In high-end receivers these controls are completed with a Notch and DSP. Attenuation and RF gain But this solution does not work if the interference is at the same frequency as the desired signal. To remove Icom IC-7410 Transceiver USB interference without rejecting the signal, you need to apply a second method, the attenuation, displayed above in the center graph.

Thanks to the RF attenuator ATT control adjusted to 20 or 40 dB for example depending on the strenght of the noise, you could lower the intensity of all signals until the Icom IC-7410 Transceiver USB reaches the background noise hash. In these conditions you will reduce the generation of undesired products. If you still heard the RFI you can in addition adjust the High and Low cut controls to reduce the passband to less than 1.

ICOM IC Product Reviews

However, adding more attenuation and reducing the RF Gain have one drawback. In many receivers there is a poor audio circuitry following the detection stage, which results in excessive noise hiss being added to the desired signals. The gain that you reduced on one side has to be made up Icom IC-7410 Transceiver USB elsewhere. If the signals are not already above the AGC attack threshold for a same amount, a significant amount of audio gain must be applied to maintain the desired listening levels at the speaker output.

Consequently, this audio gain will increase the amount of hiss present in most receivers.

Icom IC-7410 Transceiver USB Driver for Windows 7

Icom IC-7410 Transceiver USB This means that the operator has to manually adjust the AF or RF stage in order to maintain the desired signal levels under fading conditions. Now, in some conditions, you can hear both interference and noise on the frequency, tunes as well as static nosies.

In the worst case all signals are on the same frequency. To remove these undesired noises you have to use a third method, this time the IF shift as displayed above in the third graph at right.

Icom IC-7410

In most conditions, in using this approach you will get a reception free of noise and interference. However, if a strong interference gain access to the amplification stage located behind the last IF Icom IC-7410 Transceiver USB, you will hear it loud and clear in your headset. We will come back on this technology later when we will discuss about high-end transceivers.

Other Drivers