Sapphire PURE Black 990FX Marvell SATA3 Treiber Windows XP


Download Now
Sapphire PURE Black 990FX Marvell SATA3 Driver

GIGABYTE GAFXA-UD5 AM3+ AMD FX SATA 6Gb/s USB ATX AMD. -8 SATA3 ports, with the ability to run multiple RAID arrays . I finally discovered that all USB devices except the keyboard/mouse had to be the other 2 (the gray ones) are connected to a Marvell controller that's on the PCI bus (it also. Last year, in a bit of an odd move, the / AMD AM3+ motherboards built for the Bulldozer CPUs were released a few months ahead of the  Missing: Marvell ‎SATA3. Gigabyte's new GAFXA-UD5 motherboard has just been . The first thing I do now is lay all the parts out on a clean work area. . HDD's: 1TB, 2 X WD Gig Caviar Black SATA3 6Gb/S, 1 x Hitachi Deskstar 1 x Seagate 1TB . AHCI Mode on the AMD SATA ports works well and the Marvell port.


Sapphire PURE Black 990FX Marvell SATA3 Drivers PC

Type: Driver
Rating:
4.15
401 (4.15)
Downloads: 847
File Size: 1.23Mb
Supported systems: Windows All
Price: Free* [*Free Registration Required]

Download Now
Sapphire PURE Black 990FX Marvell SATA3 Driver

GAFXA-UD5 Living Review

In fact, I was so surprised that I actually went back, erased the SSD's and went through the whole process of installing everything again and re-running the tests OK, I thought, maybe things will be better with the Marvell drivers installed. But, I was bitterly disappointed, the figures were even Sapphire PURE Black 990FX Marvell SATA3

Running Bootracer showed that despite the lower figures the system actually booted quicker than it did when using the AMD controller. I should also point out that I did try a clean install of the OS a third time and double checked that I had installed the correct Marvell drivers using F6 during the OS install. However, the test results were still the same.

Download Drivers: Sapphire PURE Black 990FX Marvell SATA3

Conclusion As I said at the very beginning of these tests, I am a newbie when it comes to using SSD's and I could Sapphire PURE Black 990FX Marvell SATA3 made an error somewhere along the way although I don't believe I have done so. Also, I am not working in some test facility but in the real world, as a home user, so I would expect my results to be pretty much what the average user will be getting. However this isnt a entry level board and its a good attempt by Sapphire to position itself in the Intel market.

The short answer is yes.

Overall the Pure Black is a solid well rounded board in if you are thinking of a CrossFireX setup, the Pure Black x58 would definitely deserve a second look. Must Have Award by Modders-Inc Looking back and going through the test results leads me to a couple of conclusions. The first being that the PURE Black Intel Sapphire PURE Black 990FX Marvell SATA3 showed us some good performance numbers and it did rather well against, and sometimes beating, a well seasoned veteran of the motherboard market ASUS.

ASRock X79 Extreme9 random freezes/lockups

This shows me that Sapphire is really serious about improving their presents in this tough field. Not to say that their motherboards in the past have not been good, but just that, good.

Sapphire PURE Black 990FX Marvell SATA3 64 Bit

I will say that I am awed with the direction that they are going with this board and with the Sandy-Bridge board that is coming next. I hope that the same kind of styling and attention is being put into this new board and other motherboards from here on out. Good Hardware Award by Pureoverclock The launch of Pure Black X58 makes absolutely good sense from both business and Sapphire PURE Black 990FX Marvell SATA3 perspectives. Also, I took the Video card Waterblocks off and put the old Fan coolers back on as well as replaced the CPU Apogee block with an old Antec kuhler I had lying around so easier for trouble shooting and removal of the components so the temps are a bit higher now.

Just remembered the joy of using a boot drive, I'm going to re-install Win7 and see how that goes, I'll get back to y'all. Picture is worth a thousand words, note all items are checked on the left and it's location I recommend at least 24 hours for proper validation and 48 hours if used in a work capacity.

ISO image, and press F8 during the boot to select the location of Memtest and it should automatically start; link - http: BennyF Started Freezing up again Sapphire PURE Black 990FX Marvell SATA3 I guess it is a hardware fault somewhere, I'll run Aida64 For 24 hrs and then memtest for 12 hrs and see what happens.

After running straight for days at a time a MOBO can have heat issues in that if there's something weak e.

Other Drivers