Intel DX58OG / DX58SO2 Iflash 64Bit
Intel DX58OG / DX58SO2 Iflash Driver
Provides step-by-step illustrated instructions for updating desktop boards. Intel Motherboard LGA Abit LGA IP35 PRO Bios 14 1. Fixed the POST Intel DX58OG / DX58SO2 Iflash BIOS • Fixed issue. Intel EFI Bios Mod for Slic 1 INTEL-Motherboard Model DX58SO2-Bios revision -Source of Bios Download Link: Intel Bios Flash Utility Included. three options for updating the BIOS of the following Intel Desktop Board DX58SO2, DX58OG.
|Supported systems:||Windows 10, Windows 8.1, Windows 7|
|Price:||Free* [*Free Registration Required]|
Intel DX58OG / DX58SO2 Iflash Driver
Chassis Intrusion The board supports a chassis security feature that detects if the chassis cover has been removed. The security feature uses a mechanical switch on the chassis that can be connected to the chassis intrusion header on the Desktop Board. See Figure 23 for the Intel DX58OG / DX58SO2 Iflash of the chassis intrusion header.
Intel Phoenix BIOS IDs: Identify your Intel (OEM) Phoenix BIOS based motherboard • Wim's BIOS
Power Management Power management is implemented at several levels, including software support through the Advanced Configuration and Power Interface ACPI and the following hardware support: When an ACPI-enabled computer receives the correct command, the power supply removes all non-standby voltages. When resuming from an AC power failure, the computer returns to the power state it Intel DX58OG / DX58SO2 Iflash in before power was interrupted either on or off.
- Download BIOS Version for Intel’s DX58OG and DX58SO2 Desktop Boards
- Intel dx58so2 bios download
- Downloads for Intel® Desktop Board DX58OG
- Intel DX58OG Iflash BIOS SOX5820J.86A.0779 Windows XP/Vista/Windows 7(all 32/64)
- F7 BIOS Flash Update Instructions for Intel® Desktop Boards
- Free instant access to BIOS tips!
- BIOS Update Instructions for Intel® Desktop Boards
The Desktop Board has three power connectors. See Figure 26 on page 55 for the location of the power connectors.
Each fan header is wired to a tachometer input of the hardware monitoring and control device. All fan headers support closed-loop fan control that can adjust the fan speed or switch the fan on or off as needed. The Desktop Board has a 4-pin processor fan header and three 4-pin chassis fan headers. Failure to provide adequate standby current when using this feature can damage the power supply.
LAN wakeup capabilities enable remote wake-up of the computer through Intel DX58OG / DX58SO2 Iflash network.
Power supplies used with this Desktop Board must be able to provide enough standby current to support the standard Instantly Available ACPI S3 sleep state configuration. While in the S3 sleep state, the computer will appear to be off. If the computer has a dual-colored power LED on the front panel, the sleep state is indicated by the LED turning amber.
IFlash BIOS Update Instructions for Intel® Desktop Boards
When signaled by a wake-up device or event, the computer quickly returns to its last known awake state. Add-in cards that support this specification can participate in power management and can be used to wake the computer. Failure to do so could damage the board and any attached devices. The Desktop Board s standby power indicator, shown in Figure 4, is lit when there is standby power still present on the board even when the computer appears Intel DX58OG / DX58SO2 Iflash be off.
Intel DX58SO2 Motherboard DDR3 RAM Memory
For example, when this LED Intel DX58OG / DX58SO2 Iflash lit, standby power is still present at the memory module sockets and the PCI bus connectors. Location of the Standby Power Indicator For more information on standby current requirements for the Desktop Board, refer to the Technical Product Specification at 1http: Onboard System Control Switches The board contains the following lighted button switches that can be used to control board operation: If the button is held down for approximately 0.
The BCLK frequency is used to set the frequencies of all major functional parts of the system. Power Switch The power button switch see Figure 5, C can be used to turn the desktop board on or off.
Intel DX58SO2 Motherboard RAM Memory
This power button switch behaves the same as a chassis power switch connected via the front panel header. The onboard power button switch does not remove standby power.
To turn off the computer using the onboard power button switch, keep it pressed down for three seconds. Reset Switch The reset button switch see Figure 5, D can be used to reset the desktop board.
This power button switch behaves the same as a chassis reset switch connected via the front panel header. When the reset button switch is pressed, the board resets and runs the POST.
Intel Desktop Board DX58SO2 Product Guide. Order Number: G
Once the activity has completed, the LED will remain on. Table 4 lists the LEDs and describes their function. Then the LED will stay on when processor initialization is complete. Then the LED will stay on when memory initialization is complete. Then the LED will stay on when video initialization is complete.
Then the LED will stay on when hard drive initialization is complete. Speaker A speaker is mounted on the Desktop Board. Refer to Appendix A for a description of the board s beep codes.
Go to page 58 for instructions on how to replace the battery. The battery on the Desktop Board keeps the clock current when the computer is turned off. Disconnect the computer from its power source and from any telecommunications links, networks, or modems before performing any of the procedures described in this chapter.